Vision Net 202ER-4 ADSL Modem/Router Setup

 

 

Step 1: Follow the Quick Start Guide that comes with your modem to get your hardware wired and your computer networking setup correctly and log into you modem to configure it.

 

Step 2: Your Browser will open up to a screen with the picture shown below in the upper left corner:

 

 

            Click on the link “1483 Static IP Router”

 

Step 3:  Now you should see the following screen in the middle of your browser window:

 

 

You now need to type in the IP Address, Subnet Mask, Gateway Address and the 2 DNS servers.

(Continued on Back)

 

 


Step 4: Your screen should look like the one below but the IP address and Gateway Address will be what was provided.  The rest of the info should look the same.

 

 

Click the Submit Button at the bottom and the screen will refresh after a few seconds.  You are now ready to use your ADSL connection to enjoy the internet.  Under the default configuration of the onboard DHCP Server, you will be able to connect up to 29 computers.  If you have any questions or problems with this please feel free to contact us 24 hours a day at 1-888-338-0252.