|
Setting Up the PC
|
Logging into, Modifying, and Saving
|
| |
|
| |
|
Setting Up the PC
Before you can get into your new VisionNet 202er single port modem, you
will need to have the computer's ethernet interface to be set up for DHCP,
**OR** you will have to set up a static IP address.
Use the following address information if setting up a static IP in the
computer's ethernet interface:
IP ADDRESS: 10.0.0.9
SUBNET MASK: 255.0.0.0
GATEWAY: 10.0.0.2
PRIMARY DNS: 216.129.224.1
SECONDARY DNS: 216.220.0.1
Back to Top
|
|
| |
| |
|
| |
| |
|
Logging Into, Modifying and Saving the Configuration
- Open your web browser and type in the following address in
the location bar: http://10.0.0.2 (or whatever you
may have changed the default IP address to) and press enter.
- Type in the username and the password for your router.
The default username is: admin
The default password is: visionnet
Click OK.
- Click on the "1483 Static IP Router" link on the upper left corner of
the browser window.
- Type in the IP address, subnet mask, and default gateway from your ADSL
information package.
The "Primary DNS Server" should be: 216.129.224.1
The "Secondary DNS Server" should be: 216.220.0.1
- Save the changes by clicking on the "Submit" button.
Congratulations! You are now done configuring your VisionNet 202er Single
Port ADSL modem.
Back to Top
|
|
| |
|